Engine Piston (SolidWorks 2015 Tutorial with Caption)
Serial No. 151 Engine Piston (SolidWorks 2015 Tutorial with Caption) In this SolidWorks tutorial we will create a Piston of an Engine. It is a part modelling tutorial that will cover following topics: — · Creating 2D sketch profiles on different planes with the help of Circle tool, Rectangle tool, three point Arc tool, Line tool, Center Line tool etc. · Each of the sketch will be fully constrained with proper dimensioning and sketch constraints or you can say by using Dimension tool and Add Relations tool. · Adding ‘Extruded Base/Boss’ tool on the sketch to create the solid part and ‘Extruded Cut’ tool to remove the material from the model. · Adding fillets feature and changing the colour of the model the model. Click the following link to get the model file: –http://bit.ly/32WEFfQ Transcription of Video Create a new part file. Start with a new sketch on the Front Plane. Draw a circle with dimension and create a solid by using ‘Extrude Boss/Base’ tool. Save the file with the name ‘Engine Piston’. Create a new sketch profile on the rear face of the part and remove the material by using ‘Extruded Cut’ tool. Enter the depth value under the Direction 1 area. Create a sketch for making hole on the Right Plane of the Part. Change the colour of the model (to) ‘Polished Steel’. In this way to adding more features to complete the model.
