Nose Pliers (Solid Edge ST9 Tutorial)
Serial No. 14 Nose Pliers (Solid Edge ST9 Tutorial) In this Solid Edge Tutorial we will describe how to build the model ‘Nose Pliers’. It is a part and assembly modelling tutorial. It will cover the following topics. ………………………………………………………………………………………….. • Creating 2D Sketches on different Planes/model faces. • Use the sketch constraints that are applied on during sketch creation. • How to project the model edges, curves and sketch elements onto the selected sketch plane by using ‘Project to Sketch’ command. • Project geometry command is very useful tool for creating the various features to build the part. • Use features command such as Extrude, Revolved, Swept Cutout, Cut, Chamfer, Round etc. • Use the ‘Swept Cutout’ command to construct a cutout by extruding a cross section along a path you define. • How to mate the parts by using ‘Flash Fit’ command in the assembly. • Check the interface between one another parts by using ‘Check Interference’ command. • Use the ‘Subtract’ command (Boolean) to remove the tool body volume from selected target bodies in the assembly. You can select multiple target bodies and multiple tool bodies. • How to apply knurl image on the face of the model with the help of ‘Styles’ tool. • How to change the colour of the model by using ‘Part Painter’ tool. Click the following link to get the model file: – http://bit.ly/2onMr3G
