Pipe Wrench with Motion Simulation (Solid Edge ST9 Tutorial)
Serial No. 27 Pipe Wrench with Motion Simulation (Solid Edge ST 9 Tutorial) In this video we will describe you how to animate the assembly of ‘Pipe Wrench’ (Open and Close the Jaw) using ‘Motion’ command. It is assembly modelling tutorial. This assembly consist 1 Assembly and 9 part files (Handle, Jaw, Threading Wheel, 2 rivets, etc.) that are positioned according to design intent by using Assembly Constraints. This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of Pipe Wrench mechanism. It will cover the following topics. ………………………………………………………………………………………….. • How to set the Screw joint by applying screw pitch (inch per revolution) between two components in motion analysis environment in the assembly. • How to insert the cylindrical joint between two components. • How to suppress the mate. • How to create a custom UCS on the basis of 2D sketch in a part file by using ‘Coordinate System’ command. • Use assembly commands such as Flash Fit, Axial Align mate, Angle Mate, Connect mate, Mate/Planar Align command etc. •How to create an Angular relationship between face of two components by applying an angle value (4.77 degree) by using ‘Angle Relationship’ command. • How to mate the parts by using ‘Flash Fit’ command in the assembly. • How to flip the component by using ‘Flip Side’ option in ‘Flash Fit’ command in the assembly. • How to rotate and moving part by using ‘Drag Component’ command. • How to insert component into the assembly using drag and drop from parts library by using ‘Insert Component’ command. Click the following link to get the model file: – http://bit.ly/2IxyjMc
