Engine Exhaust Manifold|| Siemens NX Tutorial
In this Siemens NX 11 Tutorial, we will create a model of Engine Exhaust Manifold and its mirror part by using Wave Linker Function of the software. By watching this video viewer will observe as well as learn various part modelling techniques of Siemens NX software. The application of Through Curve Mesh Tool has been displayed in the video in quite a detail that is the highlight of the video. …………………………………………………………………………The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2pntXka ………………………………………………………………………… Visit the following link to watch more tutorial on Siemens NX by us https://www.youtube.com/playlist?list=PLKWX3xUP3pPpUvtPuzEPoHimjTjpdbl_Q………………………………………………………………. Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads…. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons… https://www.patreon.com/nisheethsri
Creating a custom template in Siemens NX 11 (with caption and audio narration)
Serial No. 104 Creating a custom template in Siemens NX 11 (with caption and audio narration) Transcription of the Video Open a ‘Templates’ folder in Siemens NX 11 Software on your computer. Copy the ‘model-plain-1-inch-template’ file. Paste the file in Document folder. Open this file in Siemens NX 11. A Trimetric view is set by default as a home view, so I have chosen ‘Isometric View’. Activate the ‘Drafting Preferences’ command. Set ‘Full-Size Fraction’ button in the Numerical Display option. Choose 1/16 from the Fraction Denominator list. Select Period from the Decimal Delimiter list. Click OK and save the template file. Delete the main template file. Copy the new saved template file and paste in the ‘Templates’ folder. Open new inch part file and check the result. Dimensions are shown in fraction due to setting in template. Comparative Study Method to write dimension in fraction under NX software, first write real number of the digit, then place the symbol of ‘+’, and finally write the rational number of the digit. (e.g., to write 2 and 1/2—–specify by 2+1/2). But, if you want to write dimension in fraction under Autodesk Inventor software, open a new file in Inventor, first write the real number of the digit, then leave a space and finally write the rational number of the digit. (e.g., to write 2 and 1/2—–specify by 2 1/2).
Creating a custom template in Solid Works 2017 (with caption and audio narration)
Serial No. 222 Creating a custom template in Solid Works 2017 (with caption and audio narration) Transcription of the Video Create the new part in SolidWorks 2017 software. ‘Trimetric’ view is selected by default, choose ‘Isometric’ view. Create a new sketch over front plane. Draw a sketch and apply the dimension. Activate the ‘Edit Document Units’ button. In the Unit system section, select the ‘Custom’ button. Change the decimal value up to 3 places (under Basic Units → Length). If you want to measure linear length in two different units (i.e. millimetres and inches), then go to the Dual Dimension Length and select decimal value up to 3 places. Activate the Smart Dimension tool and apply on ‘Dual Dimension’ option. Once again activate the ‘Edit Document Units’ button. Set the fraction value 32(under Basic Units → Length). Click OK. Save this file by using ‘Save As’ command. In the ‘Save as type’ section, choose ‘Part Templates’ option. Save the template file by giving it proper name, in a SolidWorks template folder. Reopen the previously created template file to watch the effect.
Creating a custom template in Solid Edge ST9 (with caption and audio narration)
Serial No. 105 Creating a custom template in Solid Edge ST9 (with caption and audio narration) Transcription of the Video Create an ansi inch part file in Solid Edge ST9. ‘Transition to Ordered’ button should be activated, for creating an ordered modelling feature. Dimetric View is selected by default, but here I choose ISO View. Activate the ‘Style’ command. In the ‘Style type’ area choose Dimension. Click new button. Set the name as ‘Fraction’. Under the Based on section select ANSI (in) option. Click the ‘Units’ tab and choose 1/16 inch in the ‘Round-off’ section list. Click OK and apply button. Activate the Solid Edge Options command. Change the Length and angular dimension value in Units tab. Previous settings is to be applied which have done earlier to create the new dimension style. Save the template file by giving it proper name, in a Solid Edge template folder. Once again, activate the Solid Edge Options command. Click File Locations button, select the ‘User templates’ option. Click Modify button and select my own created folder. Click OK. Open a new file in Solid Edge and check the result. Dimensions are shown in fraction due to selection of my previous setting.
