Support Us

Author: sorjm.digital@gmail.com

Autodesk Inventor-Surface Feature and Sculpt Tool

This video tutorial demonstrates the modelling process of Sculpture created with Autodesk Inventor software. The Highlight of the video is viewers will see how to utilize the Surface Modelling Features of the Autodesk Inventor, such as Surface Loft, Surface Revolve and Surface Sweep, as well as working with different user defined Work Planes. Later viewers will see how to stitch all the surfaces with Sculpt Tool. Sculpt tool can be used to add and remove material from an existing solid body, or to create a new solid body based on untrimmed surface geometry….     This model has been taken from the Skill Builder Tutorials provided by Autodesk Inventor. Visit the following link to learn more about Sculpt feature Autodesk Skill Builders …………………………………………… Visit the following link to watch more surface modeling tutorial on Autodesk Inventor by us https://www.youtube.com/playlist?list=PLKWX3xUP3pPr3uAtDu_Hc70NZzq8RJkxh ………………………………………………………………. To watch other detailed tutorials on the same software visit the following link https://www.youtube.com/playlist?list=PL74BDF7431ED13443 ……………………………………………………………………………… Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1

Sheet Metal Video Tutorial (Top Cover of Stabilizer)Autodesk Inventor 2010

This model is created in Autodesk Inventor’s sheet metal environment. Face tool, Flange tool and Cut tool etc. were used to create this model. Copy and paste feature command are also covered. Watch the video to understand the process of making.   Click the following link to get the model file: – http://bit.ly/2o7T8GN

Create a Helical Curve Auto Desk Inventor (Use of 3D Sketch tool)

This is a simple tutorial which shows working in 3D Sketch, moving in x,y,z direction and creating helical curve, not just at the edge of part but any where you like. In the 3D sketch first I created two circles at the edge of the bolt, with the help of include geometry tool, and then placed a point by inventor’s Precise Input dialogue box.  The point I created, is placed 1/16 inch away from the origin (X,Y,Z). The diameter of the bolt measured at 0.086 inches.  Then I started the Helical Curve tool. After selecting the start and end point of the Helical Curve, I selected Revolution and Height type Helical Curve. There in Diameter, I filled 0.086 inches and in Revolutions 10. Now I gave the dimension constraint at the starting point of helical curve, it is measured at 0.063 inch. That is all.   HD Link for this video

Creating Actual Thread –Autodesk Inventor 2010

To create actual thread follow the process as shown in the video:– Bolt & Nut (BSW-Thread)-(Video Tutorial) Autodesk Inventor 2010      HD Link for this video To download the finished file, visit the following link:– http://www.mediafire.com/?9405yryppujlm0o Bolt & Nut ((UNF-Thread)-(Video Tutorial) Autodesk Inventor 2010       HD Link for this video To download the finished file, visit the following link:–http://www.mediafire.com/?158cn9u3do387ty        

Autodesk Inventor 2010 Loft tool-Understanding a bit more

In these video tutorials, I will tell you about the Autodesk Inventor Loft tool. The details of Loft tool are displayed in the following videos. So watch the video. Autodesk Inventor 2010 Loft tool-Understanding a bit more (Part 1)       HD Link for this video   Autodesk Inventor 2010 Loft tool-Understanding a bit more (Part-2)     HD Link for this video To watch the video tutorial visit the following link:- http://youtu.be/ULDV4UpuB-o?hd=1   To download file used in the Part -2 tutorial visit the link below:–http://www.mediafire.com/?2d673rj2jpq19rr