Chuck and Key || Siemens NX Tutorial
In this Siemens NX 10 Tutorial we will create a Chuck and Key Assembly. First we will create Chuck and Key parts and then assemble it. So viewers will learn following Part and Assembly Modeling topics:– Part Modeling 1. Creating a new model file with specified units. 2. Basic Sketching 3. Extrude Tool 4. Revolve Tool 5. Swept Tool 6. Move Face 7. Trim Body 8. Pattern Tool 9. Hole Tool 10. Chamfer. Assembly Modeling 1. Creating new assembly file with specified units. 2. Adding components in assembly and moving them. 3. Applying Assembly Constraints. Visit the following link to get the model file…http://bit.ly/2JEDf2h ………………………………………………………………………… Visit the following link to watch more tutorial on Siemens NX by us https://www.youtube.com/playlist?list=PLKWX3xUP3pPpUvtPuzEPoHimjTjpdbl_Q ………………………………………………………………. Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with you friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads…. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1
Box (mini size) – Video Tutorial (Siemens NX 11)
Serial No. 70. Box (mini size) – Video Tutorial (Siemens NX 11) In this Siemens Nx Tutorial we will describe how to build the model of a ‘Box (Mini Size)’ through sheet metal features. It is a part and assembly modeling tutorial, 10 Parts and 3 Assemblies has been created (2 sheet metal parts and 8 other parts) like Box base, Box cover, Wire, Hinge, Sliding and so on in the assembly environment with the help of ‘Create New Component’ command. It will cover the following topics. ………………………………………………………………………………………….. • Creating 2D Sketches on different Planes. • Use the sketch constraints that are applied on during sketch creation. • Use Sheet metal features such as Tab, Flange, Closed Corner and Flat Pattern. • Use feature commands such as Extrude, Edge Blend, Mirror feature, Sweep along Guide, Trim body, Unite etc. • How to set thickness of the sheet and Bend radius by using Sheet Metal Preferences. • How to create a base feature by extruding a sketch along vector by thickness value by using Tab command. • How to add a flange at an angle to planar face. • How to create top-down assembly modelling in Siemens NX software. • How to remove the degree of freedom of the parts with the help of ‘Assembly Constraints’ command. • How to rotate the part by using ‘Move Component’ command. • How to smooth the edges of model by using ‘Visualization Preferences’ command. Click the following link to get the model file: – http://bit.ly/2VqZHk7
Chuck and Key || Creo Parametric Tutorial
In this Creo 3.0 Tutorial we will create a Chuck and Key Assembly. First we will create Chuck and Key parts and then assemble it. So viewers will learn the following Part and Assembly Modeling topics:– Part Modeling 1. Creating a new part file with a custom template. 2. Basic Sketching 3. Extrude Tool 4. Revolve Tool 5. Sweep Tool 6. Hole Tool 7. Round and Chamfer 8. Curve Through Points 9. Project Curve Tool 10. Pattern Tool. Assembly Modeling 1. Creating new assembly file with custom template. 2. Placing components in assembly. 3. Applying component references to fully constrained components. Visit the following link to get the model file…http://bit.ly/33U2d5l ………………………………………………………………………… Visit the following link to watch basic tutorial on Creo Parametric by us https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW ………………………………………………………………. To watch detailed tutorials on the same software visit the following link:– https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD ……………………………………………………………………………… Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1
‘Stabilizer Cover’-Sheet Metal Modelling-Siemens-NX 11 (Tutorial with Caption)
Serial No. 69 ‘Stabilizer Cover’-Sheet Metal Modelling-Siemens-NX 11 (Tutorial with Caption) The following example shows how to construct the Cover of the Stabilizer with the help of Sheet Metal commands.____________________________________This video you will learn:• Tab feature• Flange Tool• Contour Flange• Louvers• Flat Pattern Click the following link to get the model file: – http://bit.ly/2omwx9M
Create a Swept Volume (Video Tutorial with Caption) Siemens-NX 11
Serial No. 68 Create a Swept Volume (Video Tutorial with Caption) Siemens-NX 11 The Design of this model is selected from NX 10 Help:–Go to CAD → Modelling → Surface Modelling → Sweep → Swept Volume.The following example shows how to use the Swept Volume command to sweep a solid body along a path. Click the following link to get the model file: – http://bit.ly/31V2rbY
Creating Miter Flange (Video Tutorial with Caption) SolidWorks 2014
Serial No. 212 Creating Miter Flange (Video Tutorial with Caption) SolidWorks 2014 This tutorial shows how to create Miter Flange by selecting a linear edge of the sheet in solid works sheet metal environment. Click the following link to get the model file: –http://bit.ly/2OmYKYI Transcription of the Video Creating Miter Flange in SolidWorks Activate the ‘Miter Flange’ command. Hold the mouse and read the message on dialog box. Draw two lines, perpendicular to each other on the front face of the model. Give the dimension to fully constraint the sketch. Uncheck the ‘Use default radius’ option in Miter Parameters panel, enter the value in the Bend Radius field. Select ‘Material Inside’ option under type ‘Flange position’. Enter the value in the Gap distance field. Select the three inside linear edges to attach the miter flange. Finally the Miter Flange feature has been created successfully.
Subtract an Extrude Feature (Video Tutorial with Caption) Siemens-NX 11
Serial No. 67 Subtract an Extrude Feature (Video Tutorial with Caption) Siemens-NX 11 The Design of this model is selected from NX 10 Help:–Go to CAD → Modelling → Feature Modelling → Design feature → Extrude. The following example shows how to subtract an extrude feature from a solid body. Click the following link to get the model file: – http://bit.ly/2It7sRg
Extrude between two Bodies (Video Tutorial with Caption) Siemens-NX 10
Serial No. 65 Extrude between two Bodies (Video Tutorial with Caption) Siemens-NX 10 The Design of this model is selected from NX 10 Help:–Go to CAD → Modelling → Feature Modelling → Design feature → Extrude. The following example shows you how to create an extrude feature between two solid bodies. Click the following link to get the model file: – http://bit.ly/2LTlE8p
Extrude with an Asymmetric Angle (Video Tutorial with Caption) Siemens-NX 10
Serial No. 66 Extrude with an Asymmetric Angle (Video Tutorial with Caption) Siemens-NX 10 The Design of this model is selected from NX 10 Help:–Go to CAD → Modelling → Feature Modelling → Design feature → Extrude.This example shows how to extrude a draft with an asymmetric angle. Click the following link to get the model file: – http://bit.ly/2AMGEHA
Suspension (Volume-2) Siemens NX 10 Tutorial
Serial No. 64-B. Suspension (Volume-2) Siemens NX 10 Tutorial In this Siemens NX assembly tutorial, we have created a model named ‘Suspension’. The assembly consist of 12 Subassemblies and 43 parts (modelled as well as standard parts) that are positioned according to design intent by using Assembly Constraints. To complete this tutorial, first get the files used for creating the assembly. This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of suspension mechanism.To watch the designing of assembly components, visit on following link:-https://www.youtube.com/playlist?list=PLKWX3xUP3pPo0_EiKA9ypTPvI9h7A3lgX ………………………………………….(Starting of the Assembly is designed in Volume-1)The Design of the model ‘Suspension’ has been taken from Assembly file of ‘Suspension’ → ‘Sample files’ → Autodesk Inventor.______________________________________________________________Use the Assembly Arrangements command to define alternative positions for one or more components or subassemblies in your part. You can move or suppress components to create an alternate arrangement.Arrangements are created in assemblies or subassemblies and must have one active arrangement and one default arrangement or one arrangement that is both the active and the default arrangement. You can create as many arrangements as you want. If you want to view the newer version of this video, we have uploaded this video with audio narration only in One Volume on our YouTube channel. Please you can watch this video so that you can understand it easily. Click the following link to get the model file: – http://bit.ly/2IrOGd2 ………………………………………………………………Visit the following link to watch more tutorial on Siemens NX by ushttps://www.youtube.com/playlist?list=PLKWX3xUP3pPpUvtPuzEPoHimjTjpdbl_Q……………………………………………………………….Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads….http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1……………………………………………………………………………………….Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons…https://www.patreon.com/nisheethsri…………………………………………………………
