Support Us

Author: sorjm.digital@gmail.com

Tuned Pipe 2 (Autodesk Inventor 2016 Tutorial)

Serial No. 233 Tuned Pipe 2 (Autodesk Inventor 2016 Tutorial) The Design of ‘Tuned Pipe’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe’ of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly. In this Inventor Tutorial we will describe how to build the model of ‘Tuned Pipe’. It is a part modeling tutorial, it will cover the following topics. Creating 2D Sketches on different Planes and faces of the model. Creating a work plane tangent to surface and parallel to plane. Use the sketch constraints that are applied on during sketch creation. Use feature commands such as Extrude, Revolve, fillet and the Shell command. Click the following link to get the model file: – http://bit.ly/2nOffBM

Tuned Pipe 2 (SolidWorks 2015 Tutorial)

Serial No. 158 Tuned Pipe 2 (SolidWorks 2015 Tutorial) The Design of ‘Tuned Pipe’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe’ of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly. In this SolidWorks Tutorial we will describe how to build the model of ‘Tuned Pipe’. It is a part modelling tutorial, it will cover the following topics. Creating 2D Sketches on different Planes and faces of the model. Creating a work plane tangent to circular surface and parallel to plane. Use the sketch constraints by using Add Relation tool that are applied on during sketch creation. Use feature commands such as Extruded Boss/Base, Revolve Boss/Base, fillet and the Shell command. Click the following link to get the model file: – http://bit.ly/358yvLp

Tuned Pipe (SolidWorks 2015 Tutorial)

Serial No. 157 Tuned Pipe (SolidWorks 2015 Tutorial) The Design of ‘Tuned Pipe’ has been taken from Assembly file of ‘Side Exhaust-2 Shoe’ of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly. In this SolidWorks Tutorial we will describe how to build the model of ‘Tuned Pipe’. It is a part modelling tutorial, it will cover the following topics. Creating 2D Sketches on different Planes and faces of the model. Creating a work plane tangent to circular surface and parallel to plane. Use the sketch constraints by using Add Relation tool that are applied on during sketch creation. Use feature commands such as Extruded Boss/Base, Revolve Boss/Base, Extruded Cut, Revolved Cut, fillet and the Shell command. Creating duplicate features with the help of Linear Pattern tool. Click the following link to get the model file: – http://bit.ly/30NDfmm

Tuned Pipe (Autodesk Inventor 2016 Tutorial)

Serial No. 232 Tuned Pipe (Autodesk Inventor 2016 Tutorial) The Design of ‘Tuned Pipe’ has been taken from Assembly file of ‘Side Exhaust-2 Shoe’ of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly. In this Inventor Tutorial we will describe how to build the model of ‘Tuned Pipe’. It is a part modelling tutorial, it will cover the following topics.  Creating 2D Sketches on different Planes and faces of the model. Creating a work plane tangent to surface and parallel to plane. Use the sketch constraints that are applied on during sketch creation. Use feature commands such as Extrude, Revolve, fillet and the Shell command. Creating duplicate features with help of Rectangular Pattern tool.    Click the following link to get the model file: – http://bit.ly/2oAcPHm

Autodesk Certification || All the information you needed

This video contains the information related to Autodesk Certifications like what type of certification option are available,  where to get the information, where are the certification center, how to get example of exam interface and example question…… Video Transcription           All the Autodesk Certification related information can be found on following links:–           http://www.autodesk.com/training-and-certification/certification           https://autodesk.starttest.com/ Here it is mentioned that what is the importance of Autodesk Certifications…… Click here to know about the Certification options….. All the certification related option are listed here… The most popular Certifications are Autodesk Certified User and Autodesk Certified Professional Autodesk Certified User exam is for users with basic skills and Certified Professional Exam is for advance users…. Currently the following versions of Autodesk Programs Certifications are available. Suppose you want to take the Certificate for the Autodesk Inventor 2015 so click here to know the details of the associated exam. All the exam related information is provided in this preparation road map guide. Click here to download the guide. Total exam related information is present here. This is the Syllabus for Exams. To take certification exams follow the links From here Certification center can be searched which is near to the place where you reside. From here fill the name of the exam, name of the city where you live and country name….. The certification center nearby your location is placed in front of your screen. To get the answer to another most important question that comes into the mind like Exam question type and its environment, just click here to know…. and move forward… In this tutorial all the aforesaid information is stated……here you have to move step by step to get all the information.

SolidWorks Tutorial || Bolt and Nut Modeling

In this SolidWorks tutorials we are going to demonstrate the modeling of a bolt and nut which covers detailed topics of the software along with basics of part with assembly modeling.In part modeling topic we will learn about basic sketching, Extrude Boss/Base Feature, Extruded Cut, Revolved Cut, Chamfer, Helix and Spiral Curve, Swept Cut etc.From Assembly modeling section we will learn about Beginning a new assembly with a previously created component, Inserting additional components, Move with Triad Command, Application of Mates etc. Addition to this some detailed topics like creating Global Variables and using them over sketches and 3D Features, relating two features with equations, using previously created sketches in the current files etc. So let’s start the tutorial and watch everything in action…….. Transcription Creation of Bolt… Create a new part file. Start a new sketch over front plane. The units of the file must be set to IPS (inch, pound, second). Fractional and Decimal setting should be set as displayed. Create a circle over sketch origin. Now activate Equation tool. Create a Global Variable named ‘D’. All the other dimension now further will be related to this dimension. Apply the recently created Global Variable dimension over the Circle. Activate the Display Dimension Names. Convert the Circle into construction Geometry. Draw a 6 sided polygon coincident to sketch origin. Apply the dimension over it in relation to Global Variable. Display the relation between the sketches by activating ‘View Sketch Relation’ command. Apply a vertical relation between the sketch center point and edge point of polygon. The sketch is complete so save the file with the name Bolt. Now switch to the Feature Tab and activate Extrude Boss/Base Tool. The sketch has already been selected as profile for extrude. Fill the depth value and execute the command. Now change the model colour as per your wish. Now start a new sketch over Right Plane. Activate the Section View along the Right Plane to see the new sketch easily. Change the view orientation parallel to sketching plane. Activate the Intersection Curves command to take the project of the entire intersecting edges of previously created part. Convert the projected sketch into construction geometry. Draw the sketch as displayed along with dimensions. The sketch is complete so exit from the sketching mode. Activate the Revolved Cut tool. Select the sketch profile and define the axis of revolution. Click the green check mark to execute the command. Deactivate the Section View command by pressing its button once. Open the visibility of Sketch1 form the Design Tree. Start a new sketch over back face of the model. Take the project of previously drawn circle on Sketch1 into the current sketch using Convert Entities tool. Close the visibility of Sketch1. Draw the sketch as displayed. The sketch is complete so exit from the sketching mode. Activate Extruded Cut Tool. Select the sketch and place a check mark over, flip side to cut option. Fill the depth of cut and execute the command. Activate Extrude Boss/Base Tool and draw a sketch over back face of model along with dimensions. Exit the sketch and fill the depth of the extrude 2”. Hit enter key to execute the command. Select this edge of the model and activate Chamfer Tool. Fill the distance and angle values. Click green check mark to execute the command. Again create a new sketch over Right Plane as displayed. We will not create the thread profile here for the Bolt, instead we will past it from the file. Open the file named ‘UNF Screw External Thread Profile’ Here you can see a sketch profile is drawn. The pitch of the profile is 1/20 or 0.05 inches which governs all the other dimensions by some relations. Copy the sketch present in the file and return back to the previous file. Now paste the thread profile here. Properly position the sketch using Rotate and Move Entities Tools. Exit from the sketching mode. Next draw a circle along with dimensions over back face of the model. Do not exit the sketch and switch to Features Table. Activate Helix and Spiral Tool. First reverse the direction of the curve. We will define the curve using Height and Pitch. Fill the height and pitch values as shown. To coincident the curve start point with the profile end point adjust the start angle. Click the green check mark to execute the command. Activate the Swept Cut Tool. First define the profile then the path and execute the command. The model is complete so save the file and close it. Creation of Nut … Start a new part file. Start a new sketch over front plane. Set the units of file in the same way as we did in our first part. Create a circle coincident to the sketch origin. Create a Global Variable named ‘D’. All the other dimension now further will be related to this dimension. Apply the dimension over the circle. Convert the Circle into construction Geometry. Draw a 6 sided polygon coincident to sketch origin with dimensions. Apply sketch relation to fully define the sketch. The sketch is fully defined so exit from the sketching mode. Save the file with the name Nut. Activate Extrude Boss/Base Tool. Fill the depth value and execute the command. Now change the model colour as per your wish. Next start a new sketch over Right Plane. Activate the Section View along the Right Plane to see the new sketch easily. Change the view orientation parallel to sketching plane. Activate the Intersection and take the project of entire intersecting edges of the model. Convert the projected sketch into construction geometry. Draw the sketch as displayed along with dimensions. The sketch is complete so exit from the sketching mode. Activate the Revolved Cut tool. The sketch profile is automatic selected so define the axis of revolution and execute the command. Open the bolt file and draw a sketch over Right Plane as displayed. We are creating this sketch to get the dimensions for

Carb (SolidWorks 2015 Tutorial)

Serial No. 155 Carb (SolidWorks 2015 Tutorial) In this SolidWorks Tutorial we will describe how to build the model of ‘Carb’. It is a part modelling tutorial, it will cover the following topics. Creating 2D Sketches on different Planes and faces of the model. Use the sketch constraints with the help of Add Relation tool that are applied on during sketch creation. Use feature commands such as Extruded Boss/Base, Revolve Boss/Base and the fillet command etc. Create a Countersink hole and simple hole with cosmetic thread on the face of the model by using Hole Wizard command. Click the following link to get the model file: –http://bit.ly/2IoVnMR

Carb (Video Tutorial) Autodesk Inventor 2016

Serial No. 230 Carb (Video Tutorial) Autodesk Inventor 2016 The Design of ‘Carb’ has been taken from Assembly file of ‘Rear Exhaust-2 Shoe’ of Sample files of Autodesk Inventor, it is a fragment of ‘Engine MKII’ Assembly. In this Inventor Tutorial we will describe how to build the model of ‘Carb’. It is a part modelling tutorial, it will cover the following topics. · Creating 2D Sketches on different Planes and faces of the model. · Use the sketch constraints that are applied on during sketch creation. · Use feature commands such as Extrude, Revolve and the fillet command. · Create Countersink hole on the face of the model by using Hole tool.   Click the following link to get the model file: – http://bit.ly/2nQ8xeF