Support Us

Author: sorjm.digital@gmail.com

Pencil (SolidWorks 2014 Tutorial)

Serial No. 98 Pencil (SolidWorks 2014 Tutorial) In this tutorial we would create a model named Pencil. It is created in part modelling environment of SoldidWorks. We would just create some 2D sketches and use Boss / Cute Extrude Tool and Loft Base/Boss Tool to form a solid. Then would use Split line tools to cut its surface to give separate colours over the model. In the end using the Wrap tool we would emboss some text over its surface.     Click the following link to get the model file: –http://bit.ly/2oN6310

Bulb Shade (SolidWorks 2014 Tutorial)

Serial No. 97 Bulb Shade (SolidWorks 2014 Tutorial) In this tutorial we would create a ‘Bulb Shade’. We would start our work with starting a new Part file. Some 2D sketches would be created by applying Line, Circle, Points and Pattern Tool. Then new Planes would be added to create more 2D sketch and then connect all using 3D sketch. Then Surface Tools like Surface Extrude, Surface Loft, and Extend/Trim Tools are to be applied to from initial model shape. Later all the surfaces would be Knitted to form a solid. A revolve feature is to be applied to finish the model in the end. So lots of feature is covered in this tutorial…     Click the following link to get the model file: –http://bit.ly/358Twpw

Chain-Inventor Studio (Upgraded Design) – Autodesk Inventor 2013

Serial No. 220 Chain-Inventor Studio (Upgraded Design) – Autodesk Inventor 2013 This video displays a setting up of 70 chain links and 3 sprockets along a defined paths in Autodesk Inventor’s  Assembly modelling environment.  First of all some base sketching afterward some advance pattern, adaptive features and assembly mates are to be applied to set up an animation matching the real world scenario… Later the whole mechanism consisting of required mates are driven by using Inventor Studio functionality of the software……   Click the following link to get the model file: –http://bit.ly/2nIJIRH

Chain Animation in SolidWorks

As all of you know that I have created videos showing how to create a chain animation in Autodesk Inventor in the past and now a days working on SolidWorks and exploring its designing capabilities as well as my learning capacity with the aforesaid software. So I searched and found a popular similar looking animation done with SolidWorks.. I gave away it a try but I think my workstation is not much faster to run the final animation. It was not so smooth… hopefully in future I would be able to run this animation in my own way and make a simplified video so every body can understand when I get time….. I am adding video transcription here so the people who are watching it may get some help by me in the meanwhile…….   Video Transcription Here is video how to create an animated chain in SolidWorks. The chain itself is just one single part. It is based upon a layout sketch. Here I have created some sketch entities and converted into spline using fit spline command. Then creating the chain link using the sketch block so it is easy to move around it and attaching the centre line to the this path. Then in couple of features make a more realistic link. And create a second link also using the sketch block attaching the centre line to the first link and also to the path. And then create the second link with given other features. Then using a curve driven pattern with this first link it’s a body, and remember to uncheck the merge result for the second link so we have two or several multi bodies. And create the second curve driven pattern with a second link and that is because it will take to corner in a much better way. Then we move the chain into an assembly. Create a new part as a block and supress everything but the sketch path. Attach this block using the path mate. Here use the percentage and one edge is only needed. And then in the animation create it to from 0 to 100 percent. Here is a 5 second animation and test that block will move around in a smooth speed around this path. And that’s it now it can attach to first link going through to sketch and using sketch relation to this block the vertex the edge is here should be attached to the first link that will push around the chain link around the path. And that’s it now we can unsuppress everything and the chain will update on the position of this cube the help geometry. We also add some chain wheels using tool box and also adjust their position so it will start in between wheels. Some dimensions to look out for, do this before this animation is to check some dimension about the distance from the chain into the centre and measure using centre to centre that distance and also the distance between the links from the chain wheel that is the another dimension to look out for. And that basically it …..attached so everything will rotate the chain wheels and also attaching a motor with a correct speed of the chain and just saved animation I often between 30 to 50 frames per second for a smooth animation and that’s it. And now the chain will update and you have a realistic chain animation. The newly created new animation on chain by us can be watched on following link…. Chain-Inventor Studio (Upgraded Design) – Autodesk Inventor 2013 Nisheeth Srivastava…

Basic Techniques-Weldments (SolidWorks 2014 Tutorial)

Serial No. 95 Basic Techniques-Weldments (SolidWorks 2014 Tutorial)   The design of this model is selected from ‘SolidWorks Tutorial’:– Getting Started → Basic Techniques → Weldments In this lesson, you create the Weldment Box. This lesson demonstrates the followings: Structural members Cut list (before update) Trim and extend features End caps Gussets Weld beads Click the following link to get the model file: –http://bit.ly/355SKcw

Clamp for Girder (SolidWorks 2017 Tutorial)

Serial No. 92 Clamp for Girder (SolidWorks 2017 Tutorial) Dear Viewers, In this video we will show how to create a clamp of ceiling fan in SolidWorks Software. The clamp of a ceiling fan will be created in context of an assembly by using ‘Create New Part’ command. We will tell you how to create a ‘Lofted Boss/Base’ feature with the centre line rail option for making the clamp. VIDEO:–   Click the following link to get the model file: – http://bit.ly/2IkgQqm ………………………………………………………………………………. Visit the following link to watch the basic tutorial on SolidWorks by us https://www.youtube.com/playlist?list=PLb-IhKRMYSES3Zw3QHmQVqQ-rcFVzgYHy ………………………………………………………………. To watch more detailed tutorials on the same software visit the following link https://www.youtube.com/playlist?list=PLKWX3xUP3pPo77gFCyy669sI76qJa5jKw ……………………………………………………………………….. Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1 ………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering a reward to our patrons… https://www.patreon.com/nisheethsri