Engine Air Filter || Autodesk Inventor Tutorial
In this Inventor Tutorial, we will create a model of Engine Air Filter. While creating this model we will observe as well as learn various part modeling techniques of Autodesk Inventor software. ………………………………………………………………………… The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2Wjci9z …………………………………………… Visit the following link to watch the basic tutorial on Autodesk Inventor by us https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4………………………………………………………………. To watch detailed tutorials on the same software visit the following link https://www.youtube.com/playlist?list=PL74BDF7431ED13443……………………………………………………………………………… Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons… https://www.patreon.com/nisheethsri
Engine Exhaust Manifold || Creo Parametric Tutorial
In this Creo Tutorial, we will create a model Engine Exhaust Manifold and it’s mirror part. It is a part modelling tutorial so the viewer will be able to observe as well as learn various part modelling techniques of ‘Creo Parametric 4.0’ software. The application of Blend Tool is shown in quite a detail in this video so that viewers will be able to understand it in detail. …………………………………………………………………………The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/31M54M9 …………………………………………… Visit the following link to watch basic tutorials on Creo Parametric by me https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW………………………………………………………………. To watch detailed tutorials on the same software visit the following link:– https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD……………………………………………………………………………… Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as a reward to our patrons… https://www.patreon.com/nisheethsri
Application of 3D Sketch in Solid Edge ST9 (with caption and audio narration)
Serial No. 106 Application of 3D Sketch in Solid Edge ST9 (with caption and audio narration) This partial design has been used in my model ‘Bulb Shade (Solid Edge Tutorial)’. I tried to emphasize regarding the use of 3D Arc by 3 Points tool, simultaneously creating surface with the help of ‘Bound’ command. Transcription of the Video Create a new sketch on XY plane. Draw the two circles coincident from the part origin. Apply the desired dimension. Apply the symmetric constraint on these two lines and give the angular dimension. Create a 3 Point Arc, between the intersection point of line and circle. Save the part file. Create a point H1 on the circle and which lie on the end point of the vertical line. Create a new Plane 1/2 inch below from XY plane along Z axis. Create a new sketch on Plane4. Create a point on Plane4 which is the project of point H1. In Sketch panel, click on 3D Sketch tool. In 3D Draw panel, click on 3D Arc by 3 Points tool. Select two endpoints A & B are on the arc of outer circle, and lie on XY Plane. Next, select point H2 which lies on Plane4 which is the project of point H1. (A, B and H1 are coplanar points and lies on XY Plane). Exit from the 3D sketch environment. Go to the Surfacing tab, in the Surfaces panel click on Bounded tool. Select the 3D Arc and Edge Set of (Sketch1). Click on finish button to create the surface.
Engine Exhaust Manifold|| Siemens NX Tutorial
In this Siemens NX 11 Tutorial, we will create a model of Engine Exhaust Manifold and its mirror part by using Wave Linker Function of the software. By watching this video viewer will observe as well as learn various part modelling techniques of Siemens NX software. The application of Through Curve Mesh Tool has been displayed in the video in quite a detail that is the highlight of the video. …………………………………………………………………………The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2pntXka ………………………………………………………………………… Visit the following link to watch more tutorial on Siemens NX by us https://www.youtube.com/playlist?list=PLKWX3xUP3pPpUvtPuzEPoHimjTjpdbl_Q………………………………………………………………. Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads…. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons… https://www.patreon.com/nisheethsri
Creating a custom template in Siemens NX 11 (with caption and audio narration)
Serial No. 104 Creating a custom template in Siemens NX 11 (with caption and audio narration) Transcription of the Video Open a ‘Templates’ folder in Siemens NX 11 Software on your computer. Copy the ‘model-plain-1-inch-template’ file. Paste the file in Document folder. Open this file in Siemens NX 11. A Trimetric view is set by default as a home view, so I have chosen ‘Isometric View’. Activate the ‘Drafting Preferences’ command. Set ‘Full-Size Fraction’ button in the Numerical Display option. Choose 1/16 from the Fraction Denominator list. Select Period from the Decimal Delimiter list. Click OK and save the template file. Delete the main template file. Copy the new saved template file and paste in the ‘Templates’ folder. Open new inch part file and check the result. Dimensions are shown in fraction due to setting in template. Comparative Study Method to write dimension in fraction under NX software, first write real number of the digit, then place the symbol of ‘+’, and finally write the rational number of the digit. (e.g., to write 2 and 1/2—–specify by 2+1/2). But, if you want to write dimension in fraction under Autodesk Inventor software, open a new file in Inventor, first write the real number of the digit, then leave a space and finally write the rational number of the digit. (e.g., to write 2 and 1/2—–specify by 2 1/2).
Creating a custom template in Solid Works 2017 (with caption and audio narration)
Serial No. 222 Creating a custom template in Solid Works 2017 (with caption and audio narration) Transcription of the Video Create the new part in SolidWorks 2017 software. ‘Trimetric’ view is selected by default, choose ‘Isometric’ view. Create a new sketch over front plane. Draw a sketch and apply the dimension. Activate the ‘Edit Document Units’ button. In the Unit system section, select the ‘Custom’ button. Change the decimal value up to 3 places (under Basic Units → Length). If you want to measure linear length in two different units (i.e. millimetres and inches), then go to the Dual Dimension Length and select decimal value up to 3 places. Activate the Smart Dimension tool and apply on ‘Dual Dimension’ option. Once again activate the ‘Edit Document Units’ button. Set the fraction value 32(under Basic Units → Length). Click OK. Save this file by using ‘Save As’ command. In the ‘Save as type’ section, choose ‘Part Templates’ option. Save the template file by giving it proper name, in a SolidWorks template folder. Reopen the previously created template file to watch the effect.
Creating a custom template in Solid Edge ST9 (with caption and audio narration)
Serial No. 105 Creating a custom template in Solid Edge ST9 (with caption and audio narration) Transcription of the Video Create an ansi inch part file in Solid Edge ST9. ‘Transition to Ordered’ button should be activated, for creating an ordered modelling feature. Dimetric View is selected by default, but here I choose ISO View. Activate the ‘Style’ command. In the ‘Style type’ area choose Dimension. Click new button. Set the name as ‘Fraction’. Under the Based on section select ANSI (in) option. Click the ‘Units’ tab and choose 1/16 inch in the ‘Round-off’ section list. Click OK and apply button. Activate the Solid Edge Options command. Change the Length and angular dimension value in Units tab. Previous settings is to be applied which have done earlier to create the new dimension style. Save the template file by giving it proper name, in a Solid Edge template folder. Once again, activate the Solid Edge Options command. Click File Locations button, select the ‘User templates’ option. Click Modify button and select my own created folder. Click OK. Open a new file in Solid Edge and check the result. Dimensions are shown in fraction due to selection of my previous setting.
Engine Exhaust Manifold || Autodesk Inventor Tutorial
In this Inventor Tutorial, we will create a model of Engine Exhaust Manifold and its mirror part using Derived Component tool of the software. While creating this model we will observe as well as learn various part modeling techniques of Autodesk Inventor software.………………………………………………………………………… The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Important :–There is a correction in the Shell Thickness feature of the model. The thickness is 3 mm instead of 1 mm. Visit the following link to get the model file… http://bit.ly/2Ply8rz …………………………………………… Visit the following link to watch the basic tutorial on Autodesk Inventor by us https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4………………………………………………………………. To watch detailed tutorials on the same software visit the following link https://www.youtube.com/playlist?list=PL74BDF7431ED13443……………………………………………………………………………… Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons… https://www.patreon.com/nisheethsri
‘Elbow’ SolidWorks 2014 Tutorial (with caption and audio narration)
Serial No. 20 ‘Elbow’ SolidWorks 2014 Tutorial (with caption and audio narration) In this video, we create an Elbow by SolidWorks. In modelling of this part, Sweep Boss/Base, Shell, Helix/Spiral Curve, Circular Pattern, Fillet etc. tools are used. To cut thread, British Standard Pipe Thread profile is taken to be used. Click the following link to get the model file: – http://bit.ly/2nvXVBT Transcription of the Video Open a new part file in SolidWorks. Activate the ‘Edit Document Units’ command. Set the digit in decimal up to 5 places and in fraction column– 1/16 inches. Create a new sketch on the Top Plane. Draw the vertical and horizontal line from the part origin. Set the dimension of the line and convert it into construction geometry. Draw a 3 Point Arc, which lies on these two lines. Apply the radius of this arc and constraint it. Draw the line on the construction line. Exit the sketch. Create a new work-plane on this point of the line. Draw a circle on this plane. Activate the ‘Swept Boss/Base’ command. First select a circle as a profile and select the arc as a path. Click OK to finish the command. Activate the ‘Shell’ command. Select these two faces of the part and set the thickness value 1/8 inch. Save the part file, name it as ‘Elbow’. Change the colour of the internal face of the model. Create a sketch on this face and take a project of this circular edge. Go to the ‘Curves’ panel and activate the ‘Helix and Spiral’ command. Select ‘Sketch3’ from feature manager design tree. Choose ‘Height and Pitch’ option. Select reverse direction and set height and pitch value. Click OK to finish the command. Create a new sketch on the Top Plane. Activate the section view button and choose Top Plane. Open ‘BSP Thread Profile’ part file. Copy the sketch profile and paste into the previous file. Take the project of helix curve and place the sketch on the endpoint of helix curve. Convert the helix curve into construction geometry. Finish the sketch and exit from the section view. Go to the ‘Features’ tab and activate the ‘Swept Cut’ command. First select BSP Thread Profile and then next select helix curve. Click OK to finish the command. Open the visibility of part origin. Activate the ‘Axis’ button. Create an Axis between origin point and Top Plane. Activate the ‘Circular Pattern’ command. First select the axis and then select the Cut-Sweep1 feature. Set the angle 270 degree and choose reverse direction. Click OK to finish the command. Apply the fillet on these two edges.
Computer Mouse–Siemens NX 11 Tutorial
Serial No. 103. Computer Mouse–Siemens NX 11 Tutorial Inside this video, you can see full detailed process of making 3-D Parametric CAD Model through Siemens NX Software. Click the following link to get the model file: – http://bit.ly/2pSIdBr
