Blend (Loft) Feature || Creo Parametric Tutorial
In this Creo Parametric 4.0 tutorial, we will learn about the advance feature of ‘Blend Tool’. This tool is quite similar to ‘Loft’ tool available in Autodesk Inventor and Solidworks software. Recently while creating the model of ‘Engine Cylinder Head’ I got a chance to utilize it. This tool is used when we want to create a solid by joining two or more closed profiles. Video Transcription We want to create the following opening in our model. So for this, we will use the Blend Tool. Start a new sketch on this face of the model. Draw a sketch using dimensions and proper constraints in the following way. This is the sketch which we are going to create. Our sketch is complete and it is fixed at its position because there is no auto dimension left. Now exit from the sketching mode. Create another sketch on the same plane. We will use this only for reference purpose. Next, create a sketch on this face of the model. Take the reference of the previous edge to get the centre point and draw a circle of the specified dimension. Take the project of these lines so that we can get end point of line and arcs that we drew previously. Next, create four vertical centerlines at the endpoint of projected lines. With the help of ‘Divide Tool’ break the circle at the points where centerlines intersect it. Now, this circle has eight breakpoints which are similar to our rectangle consisting of fillets. This is necessary for creating our Blend Feature. Our sketch is complete exit so from the sketching mode. Start Blend Tool and activate selected section option. Click on remove material button and select the circle. Next, click on insert new section and select the rectangle. Switch to Tangency Tab and select Normal condition for the Start and End Section. Drag the start point of the second section to this end of the fillet to adjust the feature. Again verify the condition of the Start and End section is set to Normal. Click ok to execute the command. Hide the visibility of sketches. We can see the Blend tool has created a very smooth opening. Now we need to create another opening. For this, we will apply the same process. To shorten the length of the video now I will speed up next steps. Activate Reorient command and select Dynamic orient option. Spin the model by 180° along with Y direction using Center Axis and save the view with the name Custom. Create a sketch on this face of the model. This sketch is similar to the previous one but its distance from the edge is different and it is not aligned with the top circular edge. Exit from this sketch and create another on this face which will be only used for reference purpose. Start a new sketch face of the model and a circle of the specified dimension. Take the project of these lines of the previous sketches. Connect the midpoint of the projected line and centre of the circle with the help of centerline. Now draw four more parallel centre line at the endpoints of projected lines with this centre line. Now create eight breakpoints on this circle using ‘Divide Tool’ as we did earlier. We have created what we need, so exit from the sketching mode. Next, create another opening with the help of these sketches using the Blend tool. Now we will use two more set of openings using the pattern tool. Select these features from the Model Tree and select group command from the right click menu. Activate the Pattern command after selecting the Grouped features. Use direction to define pattern members. Define this edge for the direction reference and activate reverse the direction button. Specify the no of pattern members and spacing between them then execute the command. This is what we require and finally apply fillet over these edges. Hope all of you will enjoyed the tutorial. Please like it and share it with your friends and colleagues. And do not forget to subscribe us to get latest updates about our new uploads. Dear Viewers if you like our work and wanted to support us monetary, become a patron of ours at ‘Patreon’ a crowdfunding site. Check video description to know more about it. ………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2PfNoWF …………………………………………… Visit the following link to watch basic tutorials on Creo Parametric by me https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW………………………………………………………………. To watch detailed tutorials on the same software visit the following link:– https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD……………………………………………………………………………… Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as a reward to our patrons… https://www.patreon.com/nisheethsri Related Video — Engine Cylinder Head || Creo Parametric Tutorial
Engine Cylinder Head || Creo Parametric Tutorial
In this Creo Tutorial, we will create a model Engine Cylinder Head. It is a part modelling tutorial so viewer will be able to observe as well as learn various part modelling techniques of ‘Creo Parametric 4.0’ software.…………………………………………………………………………The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2PfNoWF …………………………………………… Visit the following link to watch basic tutorials on Creo Parametric by me https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW………………………………………………………………. To watch detailed tutorials on the same software visit the following link:– https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD……………………………………………………………………………… Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, in keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as a reward to our patrons… https://www.patreon.com/nisheethsri
Engine Cylinder Head || Autodesk Inventor Tutorial
In this Inventor Tutorial, we will create a model of Engine Cylinder Head. While creating this model we will observe as well as learn various part modelling techniques of Autodesk Inventor software.………………………………………………………………………… Model designing concept is taken from videos available over YouTube.……………………………………………………………………….. Visit the following link to get the model file…http://bit.ly/34ghSwd …………………………………………… Visit the following link to watch basic tutorial on Autodesk Inventor by us https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4 ………………………………………………………………. To watch detailed tutorials on the same software visit the following link https://www.youtube.com/playlist?list=PL74BDF7431ED13443 ……………………………………………………………………………… Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to Subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1 ………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, in keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to creator’s work every month/ every time they release their new work and get rewards in return. Please visit following link to know all about our work and what we are offering as reward to our patrons… https://www.patreon.com/nisheethsri
Engine Cylinder Head || Siemens NX Tutorial
In this Siemens NX 11 Tutorial, we will create a model of Engine Cylinder Head. By watching this video viewer will observe as well as learn various part modelling techniques of Siemens NX software.…………………………………………………………………………The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2JwMEJ5 ………………………………………………………………………… Visit the following link to watch more tutorial on Siemens NX by ushttps://www.youtube.com/playlist?list=PLKWX3xUP3pPpUvtPuzEPoHimjTjpdbl_Q………………………………………………………………. Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads….http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, to keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to the creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as the reward to our patrons… https://www.patreon.com/nisheethsri
Application of ‘Bridge Curve’ tool–Siemens NX 11 Tutorial
Serial No. 102 Application of ‘Bridge Curve’ tool–Siemens NX 11 Tutorial Click the following link to get the model file: – http://bit.ly/33bHw4v
Suspension (Assembly Volume-2) Solid Edge ST9 Tutorial
Serial No. 75-B. Suspension (Assembly Volume-2) Solid Edge ST9 Tutorial In this Solid Edge ST9 Assembly tutorial, we have created a model named ‘Suspension’. The Assembly consist of 12 Subassemblies and 43 parts (modelled as well as standard parts) that are positioned according to design intent by using Assembly Constraints. To complete this tutorial, first get the files used for creating the assembly. This tutorial will give you a good practice of applying constraints in an assembly and give you an idea of suspension mechanism. To watch the designing of assembly components, visit on following link:- https://www.youtube.com/playlist?list=PLKWX3xUP3pPpRpkNsubaQdZuTGcNh1-MJ …………………………………………. (Starting of the Assembly is designed in Volume-1) The Design of the model ‘Suspension’ has been taken from Assembly file of ‘Suspension’ → ‘Sample files’ → Autodesk Inventor. Click the following link to get the model file: – http://bit.ly/2OzRusu
Engine Rocker Arm Assembly || Creo Parametric Tutorial
In this Creo 4.0 Tutorial, we will create an assembly of Rocker Arm which is a component of Engine. While creating this model we will observe as well as learn various part and assembly modelling techniques of Creo Parametric software. First components of assembly named Rocker Arm Pin_1 & 2, Rocker Arm Roll and Rocker Arm and later with the help of them the final assembly will be created. ………………………………………………………………………… The model designing concept is taken from videos available on YouTube. ………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2JjfXyI …………………………………………… Visit the following link to watch basic tutorials on Creo Parametric by me https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW………………………………………………………………. To watch detailed tutorials on the same software visit the following link:– https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD……………………………………………………………………………… Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, in keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as a reward to our patrons… https://www.patreon.com/nisheethsri
Engine Rocker Arm Assembly|| Siemens NX Tutorial
In this Siemens NX 11 Tutorial, we will create an assembly of Rocker Arm which is a component of Engine. While creating this model we will observe as well as learn various part and assembly modelling techniques of Siemens NX software. First components of assembly named Rocker Arm Pin_1 & 2, Rocker Arm Roll and Rocker Arm and later with the help of them the final assembly will be created.…………………………………………………………………………The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2WnEU1i ………………………………………………………………………… Visit the following link to watch more tutorial on Siemens NX by us https://www.youtube.com/playlist?list=PLKWX3xUP3pPpUvtPuzEPoHimjTjpdbl_Q………………………………………………………………. Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with you friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads…. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, in keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to creator’s work every month/ every time they release their new work and get rewards in return. Please visit following link to know all about our work and what we are offering as reward to our patrons… https://www.patreon.com/nisheethsri
‘Stair Case (Double Fold) with Railing’–Autodesk Inventor 2018 Tutorial
Serial No. 304 ‘Stair Case (Double Fold) with Railing’–Autodesk Inventor 2018 Tutorial Inside this video, you can see full detailed process of making 3-D Parametric CAD Model through Autodesk Inventor Software. Click the following link to get the model file: –http://bit.ly/2nwSIJM
Engine Rocker Arm Assembly || Autodesk Inventor Tutorial
In this Inventor Tutorial, we will create an assembly of Rocker Arm which is a component of Engine. While creating this model we will observe as well as learn various part and assembly modelling techniques of Autodesk Inventor software. First components of assembly named Rocker Arm Pin_1 & 2, Rocker Arm Roll and Rocker Arm and later with the help of them the final assembly will be created.………………………………………………………………………… The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2q183TV …………………………………………… Visit the following link to watch basic tutorials on Autodesk Inventor by us https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4………………………………………………………………. To watch detailed tutorials on the same software visit the following link https://www.youtube.com/playlist?list=PL74BDF7431ED13443……………………………………………………………………………… Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to Subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, in keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as a reward to our patrons… https://www.patreon.com/nisheethsri
