Change the Default background and Text color in Windows 8.1 Pro, 64 bit (with caption and audio)
Serial No. 301 Change the Default background and Text color in Windows 8.1 Pro, 64 bit (with caption and audio narration) Transcription of the Video To choose ‘Personalize’ option, right-click on the desktop. Now the ‘Personalization’ dialogue box is visible in front of the screen. Go to the ‘High Contrast Themes’ and select the ‘High Contrast White’ button. Minimize the window, click on the File Explorer button. Now, the ‘High Contrast White’ theme is activated on the screen. Return back to the ‘Personalization’ dialogue box. In the ‘High Contrast’ field, choose ‘Colour’ option. In ‘Color and Appearance’ dialogue box, go to the ‘Window background’ tab and change the RGB value of window background colour according to your choice. Click OK to execute the command. Set two window applications parallel simultaneously to watch the result. Click apply button, now you will see that the background colour of window has changed. In the same way, go to the ‘Text’ tab, change the text colour of the window and apply it. Now see that the text colour of the window became changed. Go to the ‘Button’ tab and change the Background and Foreground colour of the window. Click ‘Save Changes’ button. Maximize the window and observe the result. Go back to the ‘Personalization’ dialogue box and save the theme by name. Here are some more options such as go to the windows default theme or custom theme.
PTC Creo 4.0 Mechanism Tutorial || Using Servo Motors
In this creo tutorial, we will learn to use application of servo motors in the creo mechanism. In some previous tutorials I have shown how to create components of the hinge and prepare assembly of it using pin connection, afterwards, its animation was also shown using creo mechanism. In creo 4.0 the interface of applying the servo motors in the creo mechanism is changed a bit so I am recreating it for the benefit of viewers. I got to know about it from a user comment. Watch the following video to understand how to set assembly of Hinge before setting up servo motor… https://youtu.be/RW0BnPEy9tw ………………………………………………………………………… Watch the following video to know how to create the components of Hinge model… https://youtu.be/xS05RVynMFc ………………………………………………………………………… Visit the following link to watch basic tutorials on Creo Parametric by me https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW………………………………………………………………. To watch detailed tutorials on the same software visit the following link:– https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD……………………………………………………………………………… Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1 ………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, in keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to creator’s work every month/ every time they release their new work and get rewards in return. Please visit following link to know all about our work and what we are offering as reward to our patrons… https://www.patreon.com/nisheethsri
Golf Ball || Autodesk Inventor Tutorial
In this Inventor Tutorial, we will create a model of Golf Ball. While creating this model we will learn how to use Revolve and Circular Pattern tool efficiently. ………………………………………………………………………… Model designing concept is taken from videos available over YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/2poZ6Un …………………………………………… Visit the following link to watch basic tutorial on Autodesk Inventor by us https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4 ………………………………………………………………. To watch detailed tutorials on the same software visit the following link https://www.youtube.com/playlist?list=PL74BDF7431ED13443 ……………………………………………………………………………… Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to Subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1 ………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, in keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to creator’s work every month/ every time they release their new work and get rewards in return. Please visit following link to know all about our work and what we are offering as reward to our patrons… https://www.patreon.com/nisheethsri
Golf Ball || Creo Parametric Tutorial
In this Creo Tutorial, we will learn to create a model of ‘Golf Ball’. It is a part modelling tutorial so viewers will be able to watch various part modelling techniques of ‘Creo Parametric 4.0’ software like Revolve Tool, Geometry Pattern, Round and Auto Round etc. …………………………………………………………………………The model designing concept is taken from videos available on YouTube.………………………………………………………………………… Visit the following link to get the model file… http://bit.ly/35VbhJf …………………………………………… Visit the following link to watch basic tutorials on Creo Parametric by me https://www.youtube.com/playlist?list=PLhloyISzAQksnPmtyZtncWCQJ3NpoX_SW ………………………………………………………………. To watch detailed tutorials on the same software visit the following link:– https://www.youtube.com/playlist?list=PLKWX3xUP3pPorULULn8Q5BbDXqBjK_ZXD ……………………………………………………………………………… Hope all of you will enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1 ………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, in keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to creator’s work every month/ every time they release their new work and get rewards in return. Please visit the following link to know all about our work and what we are offering as a reward to our patrons… https://www.patreon.com/nisheethsri
How to write subscript and superscript text in Autodesk Inventor (with caption and audio narration)
Serial No. 299 How to write subscript and superscript text in Autodesk Inventor (with caption and audio narration) Transcription of the Video Edit the ‘Sketch1’ from the browser bar. Select the text box, right -click and choose ‘Edit text’ option. The Format Text dialogue box appears in the graphics window. Write the text in the Format Text dialogue box as shown. First type F, then type the caret symbol (^) followed by digit 1, → select caret symbol along with digit 1, afterwards apply the ‘Stack’ button. The resultant type letter will be F1. First type y, then type digit 2 followed by caret symbol (^), → select digit 2 along with caret symbol, afterwards apply the ‘Stack’ button. The resultant type letter will be y2. Select all the text and change the size. Click OK to close the dialogue box. Click Finish sketch button. Save the part file.
How to change background color in Autodesk Inventor (with caption and audio narration)
Serial No. 300 How to change background color in Autodesk Inventor (with caption and audio narration) Transcription of the Video Open a file named as ‘Part2’ and go to the Tools tab. Activate the ‘Application Options’ command. Click ‘Colors’ tab and choose ‘Background Image’ option under the Background area. Go in the File name field, choose the image file named as ‘Custom Color of Background’. Click open and click Apply button. Close the dialogue box to execute the command. Close the ‘Part2’ file and reopen it. Now the new background image become active in the design area. In the same way, you can select other background images in the design area.
How to write ‘Mathematical Equation’ in Microsoft Office–Exercise-1 (with caption and audio narration)
Serial No. 296 How to write ‘Mathematical Equation’ in Microsoft Office–Exercise-1 (with caption and audio narration) The sample equation file is selected from my model, named as ‘’Paraboloid (Autodesk Inventor)’. The equation of Parabola is is written by the ‘Insert an Equation’ command in Microsoft Word document. Click the following link to get the model file: – http://a360.co/1cG8C2n Transcription of the Video This equation is created by the ‘Insert an Equation’ command in Microsoft Word document, at present position it is shown as an image file. Open a new Microsoft Word document file. Change the colour of the page for relaxing your eyes. Write the text as usual in the word document. Go to the Insert tab and activate the ‘Insert New Equation’ command. Next, go to the Fraction tab, select the ‘Stacked fraction’ option, then write the text. Type letter F, followed by digit 1 and subsequently type letter F, followed by digit 2 > select digit 1 and 2, afterwards apply the ‘Subscript’ button, the resultant typed letter will be F1 F2. Save the file with the name ‘Equation of Paraboloid’. Return back to ‘Part2’ file and edit the sketch1, delete the image file and text. Go to the Insert tab and activate the ‘Insert Image’ command > open the image file. Adjust the image file in the design window. Finish the sketch and save the part file.
How to write ‘Mathematical Equation’ in Microsoft Office–Exercise-2 (with caption and audio narration)
Serial No. 297 How to write ‘Mathematical Equation’ in Microsoft Office–Exercise-2 (with caption and audio narration). The sample equation file is selected from my model, named as ‘Hyperboloid (Autodesk Inventor)’. The equation of Hyperbola is is written by the ‘Insert an Equation’ command in Microsoft Word document. Click the following link to get the model file: – http://a360.co/13fsoDh Transcription of the Video This equation is created by the ‘Insert an Equation’ command in Microsoft Word document, at present position it is shown as an image file. Open a new Microsoft Word document file. Change the colour of the page for relaxing the eyes. Write the text as usual in the word document. Go to the Insert tab and activate the ‘Insert New Equation’ command. Next, go to the Fraction tab, select the ‘Stacked fraction’ option and then write the text. Go to the Bracket tab, choose the ‘Single Bracket’ option. Insert the stacked fraction option inside the single bracket and then write the digits in numerator and denominator. Save the file with the name ‘Equation of Hyperbola’. Type letter O, subsequently type letter F followed by digit 1 > select digit 1, then apply the ‘Subscript’ button, the resultant typed letter will be OF1. Choose a square root option in the ‘Radical’ tab from the equation toolbar. Choose superscript option in the ‘Script’ tab from the equation toolbar. And write the text inside the square root. Select the desired digits and convert into the subscript text by using the ‘Subscript’ command. Close the word document and return back to ‘Part2’ file. Edit the Sketch1 from the browser bar and delete the image file. Activate the ‘Insert Image’ command and open the image file. Rotate the image in a proper position in the design window. Finish the sketch and save the part file.
How to write ‘Mathematical Equation’ in Microsoft Office–Exercise-3 (with caption and audio narration)
Serial No. 298 How to write ‘Mathematical Equation’ in Microsoft Office–Exercise-3 (with caption and audio narration). The sample equation file is selected from my model, named as ‘Éllipsoid (Autodesk Inventor)’. Click the following link to get the model file: – http://a360.co/15Tmd2u Transcription of the Video Open the ‘Part2’ file. This equation is created by the ‘Insert an Equation’ command in Microsoft Word document, at present position it is shown as an image file. Open a new Microsoft Word document file. Change the colour of the page to relax the eyes. Write the text as usual in the word document. Type letter C, subsequently type letter F followed by digit 1. In the same manner, type letter C, subsequently type letter F followed by digit 2 > select digit 1 & 2, then apply the ‘Subscript’ button, the resultant typed letter will be CF1 & CF2. Go to the Insert tab and activate the ‘Insert New Equation’ command. Next, choose square root option in the ‘Radical’ tab from the equation toolbar. Choose a superscript option in the ‘Script’ tab from the equation toolbar. And write the text inside the square root. Save the file with the name ‘Equation of Ellipse’. Select the numeric 1 & 2 and convert into the subscript text by using the ‘Subscript’ command. Choose staked fraction option in the ‘Fraction’ tab from the equation toolbar. Insert the superscript option inside the staked Fraction and then write the text. Close the word document and return back to ‘Part2’ file. Edit the Sketch1 from the browser bar and delete the image file. Activate the ‘Insert Image’ command and place the newly edited image file. Set the position of the image in the design window. Finish the sketch and save the part file.
Autodesk Inventor 2018 Basic Tutorial || Loft Feature|| Along with captions and audio narration
Hello viewers, in this tutorial we would learn about the Loft feature of Autodesk Inventor by developing a solid named Hammer Head. This feature is used, when we want to create a solid by joining more than one closed profile. Sometimes optional rails and points are used that help in controlling the final outcome. In addition to this creation process of new Work Planes, Copy/ Paste function of sketches and many more things are also covered in this tutorial. Video Transcription Start a new part file using the metric template. Start a sketch on the XY plane. Draw a rectangle of 60 x 60 mm coincident with the centre point, using Two point centre rectangle tool. The sketch is complete so exit from the sketching mode. Turn on the visibility of XY plane from the browser bar. Create a new work plane by activating the ‘Offset from Plane’ command. Fill 25 mm as an offset value. Turn off the visibility of the XY plane. Now create a new sketch on this new work plane1. Draw a circle of 50 mm coincident with the centre point and finish the sketch. Again create another work plane at an offset distance of 25 mm from the work plane1. Turn off the visibility of the work plane1. Next, create a sketch, on the work plane2. Activate ‘Project Geometry’ tool and take the project of following point present in the previous sketch. Draw a circle coincident with these two points and exit from the sketching mode. Next, create another work plane at an offset distance of 40 mm from the work plane2. Again, turn off the visibility of previous work plane. Select the Sketch 3 from the browser bar and copy it using right click context menu. Next select work plane3 paste the copied sketch using right-click context menu. Turn off the visibility of work plane3. Activate Loft tool. Select the sketches, step by step as displayed here. Click Ok to create the Loft feature. Change the colour of the model as per your wish. Make some changes in the lighting settings to see the model clearly. Turn off the textures in the file. Save the file with the name Hammer Head. Set the current view as Home View using View Cube. Create a work plane at an offset distance of 200 mm from this face of the model. Start creating a sketch on this new work plane. Draw a line 34.55 mm away from the centre point of the model. Exit from the sketching mode. Next, create a work plane by activating ‘Angle to Plane around Edge’ command. To create the work plane first select work plane4 then select sketch line and in angle field fill 200°. Turn off the visibility of work plane4. Create a sketch over this work plane. First, take the project of this line and turn off the visibility of sketch5. Activate two-point centre rectangle tool and draw a rectangle of 150 x5 mm, coincident with the centre of the projected line. Convert the projected line into construction geometry and exit from the sketching mode. Start a new sketch over YZ Plane. Take the project of this point and close the visibility of sketch6. Draw an arc connecting centre point of the model and projected curve. Apply a dimension of 550 mm over it and exit from the sketching mode. Turn on the visibility of sketch6. Activate Loft Tool. Select following sketch and edge of the model to define sections for the loft. Activate Center Line rail option. Next select arc to define the rail and execute the command. Turn off the visibility of work plane5. Our work is complete hence save the file. This is the final outcome of our model ‘Hammer Head’. …………………………………………… Visit the following link to get the model file… http://bit.ly/2Wvb0bG …………………………………………… Visit the following link to watch basic tutorial on Autodesk Inventor by us https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4 ………………………………………………………………. To watch detailed tutorials on the same software visit the following link https://www.youtube.com/playlist?list=PL74BDF7431ED13443 ……………………………………………………………………………… Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to Subscribe us to get latest updates about our new uploads. http://www.youtube.com/user/nisheethsorjm?sub_confirmation=1 ………………………………………………………………………………………. Dear Viewers if you like our work and wanted to support us, in keep continuing the good work, then become a patron of ours at ‘Patreon’ site. Patreon is a simple way for you to contribute to creator’s work every month/ every time they release their new work and get rewards in return. Please visit following link to know all about our work and what we are offering as reward to our patrons… https://www.patreon.com/nisheethsri
