Support Us

Author: sorjm.digital@gmail.com

Creo Parametric Basic Tutorial || Blend (Loft) Feature

In this tutorial, we will learn about the Blend Tool of Creo Parametric by developing a solid named ‘Hammer Head’.  This Tool is used when we want to create a solid by joining two or more closed profiles. Another important tool which is used in the modelling of this part is Swept Blend. As we can understand by its name it is a combination of sweep and blend both features. In this feature, multiple closed profiles are joined using trajectory. In addition to this general part modelling process of creating basic sketches, creating Planes etc. are also discussed. Note:–The video does not have audio assistance but I have given a sufficient amount of pause over the tool and their tip so that they can be read easily. In addition to this annotations are also applied over important places… so please focus on them to understand what is being done and how…….. Click the following link to get the model file: –http://bit.ly/2n8TgFP

Creo Parametric Basic Part Modeling Tutorial || Pencil

In this tutorial, we are going to watch the basic part modelling techniques in Creo Parametric by developing the model of a ‘Pencil’. The first section demonstrates Basic Sketching, New planes creation, Extrude, Blend Tool and Extrude with remove material option, new axis creation and duplication of the feature on the basis axis. In the next section, we will split the face of the model to give it a different colour. To understand this section first watch the video the link of that video is following …https://www.youtube.com/watch?v=WKQs5ODeP70 Note:–The video does not have audio assistance but I have given sufficient amount of pause over the tool and their tip so that they can be read easily. In addition, annotations are also applied on the important places… so please focus on them to understand what is being done and how…… Click the following link to get the model file: – http://bit.ly/2oRtbeQ

Autodesk Inventor Sheet Metal Tutorial || Contour Roll Tool

In this tutorial we are going to discuss about the Contour Roll Tool in detail. This tool is used when we want to create a sheet by revolving a profile consisting of lines arcs, splines or elliptical arcs around an axis. ……………………………………………………………………Transcription of Video…………………………………………………………………… Here we have a sketch profile which is drawn previously. Activate Contour Roll tool from the Create Panel of Sheet Metal Tab. In the Contour Roll Tool Dialogue Box we can see Profile Selection is active. There are four different options available in Unroll Method. Let us first see the Centroid Cylinder option. First select the profile then Axis of revolution. Here we can see it is telling what would be Neutral Radius and Unfold / Unrolled Length of sheet. Click Apply button to create the feature. Activate Create Flat Pattern Tool and check out the extents of the sheets. The Length mentioned here is the same as it was in the Contour Roll dialogue Box. Let’s see the another option Custom Cylinder. Here we have to define Neutral Axis in addition to profile and Axis of revolution. Here it states that the Unrolled length would be 78.54 mm. Again check the Unfolded sheet to find the difference. The next option is the developed length or Unrolled Length… Here we will fill the same 78.54 length that we got in the Custom Cylinder unroll method. After defining the Profile and Axis we get the same 50 mm radius of Neutral Axis that is mentioned in our sketch. In the last method we will only define Neutral Radius along with Profile and Axis. Here we can see the Unroll Length will be 78.54 if we defining the Neutral Radius to 50mm. Visit the following link to find some of our popular tutorials on Autodesk Inventor’s Sheet Metal functionality………   http://bit.ly/1JPIa9l The file shown in the video is taken from the Book ‘Mastering Autodesk Inventor’.

Shelf-Wooden for Food Storage (Volume-2) Autodesk Inventor 2016

Serial No. 222-B Shelf-Wooden for Food Storage (Volume-2) Autodesk Inventor 2016 This Autodesk Inventor assembly tutorial which also covers part modeling section will demonstrate how to create parts in context of assemblies, reuse specific parts using mirror and pattern tool precisely so that their associativity do not break after changing the parameters…. which save a lot of time.  Click the following link to get the model file: –http://bit.ly/2nNVESa

Shelf-Wooden for Food Storage (Volume-1) Autodesk Inventor 2016

Serial No. 222-A Shelf-Wooden for Food Storage (Volume-1) Autodesk Inventor 2016 This Autodesk Inventor assembly tutorial which also covers part modeling section will demonstrate how to create parts in context of assemblies, reuse specific parts using mirror and pattern tool precisely so that their associativity do not break after changing the parameters…. which save a lot of time.  Click the following link to get the model file: –http://bit.ly/2nNVESa

Creo Parametric || Splitting a face of a solid to apply different colours over it.

  This tutorial shows a way how to split a face of a solid to apply different colours over it, up to my information there is no specialized tool for such operation in Creo Parametric. If you find the video useful please like it and share it with you friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads….………………………………………………………….Note:–The video does not have audio assistance but I have given sufficient amount of pause over the tool and their tip so that they can be read easily. In addition this annotations are also applied over important places… so please focus on them to understand what is being done and how……..

Autodesk Inventor Tutorial || Modeling a Cold Drink Bottle

In this Autodesk Inventor 2016 tutorial, we are going to show the modelling of a Cold Drink Bottle which is quite similar to the bottle used by many carbonated soft drink brands like Coco-Cola, Pepsi etc. This tutorial is divided in four sections. The tutorial contains some image slides in between that provides quite descriptive information about the modelling process. These slides are available in PDF form too, that can be get along with finished model file. To learn basics of Autodesk Inventor watch the videos available in the following playlist:—https://www.youtube.com/playlist?list=PLb-IhKRMYSERYpB48aY-sZ10fN6CfXIL4…………………………………………………………………………….And other popular modeling videos with Autodesk Inventor by us can be found on following link….https://www.youtube.com/user/niveshandnisheeth/videos?sort=p&shelf_id=14&view=0 Click the following link to get the model file: – http://bit.ly/2NLspJf